Biến tần Fuji Frenic-Mini-C2

Thông số kỹ thuật

Chế độ điều khiển:Driving induction motor (IM) • V/f control, slip compensation, auto torque boost • Dynamic torque vector control, automatic energy saving control Driving permanent magnet synchronous motor (PMSM) (without speed / position sensor) *2 • Speed control range: 10% or more of the base frequen.
Tần số ngõ ra: 0 to 400Hz.
Tần số sóng mang: 0.75 to 16 kHz variable.
Torque khởi động: 150% or more (Running at 1 Hz, with slip compensation and auto torque boost active).
Khả năng quá tải( overload current rating): 50% of rated current for 1 min. 150% of rated current for 1 min or 200% of rated current for 0.5 s (for the rated current given in parentheses).
Chế độ bảo vệ: 0c1 (Overcurrent during acceleration) • 0c2 (Overcurrent during deceleration) • 0c3 (Overcurrent at constant speed) • lin (Input phase loss) • lu (Undervoltage) • 0pl (Output phase loss) • 0u1 (Overvoltage during acceleration) • 0u2v (Overvoltage during deceleration) • 0u3v (Overvoltage during constant speed) • 0h1 (Overheating of the heat sink) • 0h2 (External thermal relay tripped) • 0h4 (Motor protection (PTC thermistor)) • 0h6 (Charging resistor overheat) • dbh (Braking resistor overheat) • cof (PID feedback wire break) • 0l1 (Motor overload) • 0l2 (Motor 2 overload) • 0lu (Inverter unit overload) • er1 (Memory error) • er2 (Keypad communications error) • er3 (CPU error) • er6 (Operation procedure error) • er7 (Tuning error) • er8 (RS-485 error) • erf (Data save error due to undervoltage) • err (Mock alarm) • erd (Step-out detection (for drive of permanent magnet synchronous motors)) *2